Runner and Gating Design Handbook 3e

• Author : John P. Beaumont
• Publisher : Unknown
• Release Date : 2019-10-07
• ISBN : 1569905908

For the first time, both the art and the science of designing runners and gates are presented in a concise format. Tried and true runner and gating design techniques successfully used with various materials and molding applications are described together with cutting edge new technologies. The book will help readers determine when to use what type of runner system and how to isolate molding problems generated by the gate and runner vs. other molding issues. Much emphasis is placed on

• Author : David O. Kazmer
• Publisher : Carl Hanser Verlag GmbH Co KG
• Release Date : 2012-11-12
• ISBN : 9783446434196

This book provides a vision and structure to finally synergize all the engineering disciplines that converge in the mold design process. The topics are presented in a top-down manner, beginning with introductory definitions and the "big picture" before proceeding to layout and detailed design of molds. The book provides very pragmatic analysis with worked examples that can be readily adapted to "real world" mold design applications. It should help students and practitioners to understand the inner workings of injection molds

• Author : Mehdi Moayyedian
• Publisher : Springer
• Release Date : 2018-11-02
• ISBN : 9783030033569

This book describes an effective framework for setting the right process parameters and new mold design to reduce the current plastic defects in injection molding. It presents a new approach for the optimization of injection molding process via (i) a new mold runner design which leads to 20 percent reduction in scrap rate, 2.5 percent reduction in manufacturing time, and easier ejection of injected part, (ii) a new mold gate design which leads to less plastic defects; and (iii) the introduction of

• Author : E. Alfredo Campo
• Publisher : Hanser Gardner Publications
• Release Date : 2006
• ISBN : UOM:39015064917191

This handbook was written for the injection molding product designer who has a limited knowledge of engineering polymers. It is a guide for the designer to decide which resin and design geometries to use for the design of plastic parts. It can also offer knowledgeable advice for resin and machine selection and processing parameters. Manufacturer and end user satisfaction is the ultimate goal.

• Author : Tim A. Osswald,Lih-Sheng Turng,Paul J. Gramann
• Publisher : Hanser Gardner Publications
• Release Date : 2008
• ISBN : 1569904200

The Injection Molding Handbook provides engineers, professionals and other involved in this important industry sector with a thorough up-to-date overview of injection molding processing equipment and techniques, including the basic fundamental information on chemistry, physics, material science and process engineering. It covers all components of the injection molding machine and the various process steps. Topics directly affecting injection molding, such as material selection, process control, simulation, design and troubleshooting complete this reference book for the injection molder. The updated second

• Author : Robert A. Malloy
• Publisher : Carl Hanser Verlag GmbH Co KG
• Release Date : 2012-11-12
• ISBN : 9783446433748

The goal of the book is to assist the designer in the development of parts that are functional, reliable, manufacturable, and aesthetically pleasing. Since injection molding is the most widely used manufacturing process for the production of plastic parts, a full understanding of the integrated design process presented is essential to achieving economic and functional design goals. Features over 425 drawings and photographs. Contents: Introduction to Materials. Manufacturing Considerations for Injection Molded Parts. The Design Process and Material Selection. Structural Design

• Author : John Campbell
• Publisher : Butterworth-Heinemann
• Release Date : 2011-07-20
• ISBN : 9780080964232

Complete Casting Handbook is the result of a long-awaited update, consolidation and expansion of expert John Campbell’s market-leading casting books into one essential resource for metallurgists and foundry professionals who design, specify or manufacture metal castings. The first single-volume guide to cover modern principles and processes in such breadth and depth whilst retaining a clear, practical focus, it includes: A logical, two-part structure, breaking the contents down into casting metallurgy and casting manufacture Established, must-have information, such as Campbell’

• Author : Shia-Chung Chen,Lih-Sheng Turng
• Publisher : Carl Hanser Verlag GmbH Co KG
• Release Date : 2019-05-06
• ISBN : 9781569906040

This book covers the most recent and important developments in advanced injection molding technologies, such as intelligent process control; technology innovations and computer simulation for emerging special injection molding processes like microinjection molding, microcellular injection molding, water-assisted foaming, water-assisted injection molding, and variable mold temperature technologies; conductive polymer foams and composites; injection molding of optical products; and an automated mold design navigation system with integrated knowledge management capability. It is intended to be used as a textbook for both introductory

• Author : John P. Beaumont,Robert Nagel,R. Sherman
• Publisher : Hanser Gardner Publications
• Release Date : 2002
• ISBN : 1569902917

This book simultaneously addresses the subjects of successful molded product development and the practical application of injection molding simulation in this process. A strong emphasis is placed on establishing a clear understanding of the complex interaction between materials, process, mold design and part design, and how injection simulation can be used to evaluate this interaction.

• Author : Randy Kerkstra,Steve Brammer
• Publisher : Carl Hanser Verlag GmbH Co KG
• Release Date : 2021-04-06
• ISBN : 9781569908365

This highly practical troubleshooting guide solves injection molding problems systematically and quickly. The rigorous but user-friendly approach employs the authors’ proven »STOP« methodology, considering molding process, mold, machine, and material (4M’s) as possible sources of part defects. Importantly, the interaction between tooling, processing, and material is emphasized, allowing successful resolution of difficult problems where »by-the-books« approaches fail. Starting from troubleshooting methodology and tools, there is a focused discussion of key areas impacting troubleshooting, in particular the 4M’s, followed

• Author : Vikram Bhargava
• Publisher : Carl Hanser Verlag GmbH Co KG
• Release Date : 2017-12-11
• ISBN : 9781569905814

Tooling, molding, secondary operations, material selection, evaluation and testing, design, project management, costing, value engineering, international supplier management and enhancement, and more: this book provides a broad insight from the author’s over 40 years of experience in the plastics industry. Aimed at both technical and non-technical personnel involved with plastic product design and manufacturing, this book shows how having the big picture leads to effective solutions and high-quality products. Numerous case studies of product failures exemplify the key concepts. The

• Author : Andreas Öchsner,Holm Altenbach
• Publisher : Springer
• Release Date : 2017-07-13
• ISBN : 9783319595900

This book offers a snapshot of recent developments in improving the properties and performance of engineering materials and structures. It discusses modeling properties related to classical mechanical, thermal, electrical and optical fields as well as those related to surface-specific quantities (e.g. roughness, wear and modifications due to surface coatings). The material types presented range from classical metals and synthetic materials to composites. Competitiveness due to cost efficiency (e.g. lighter structures and the corresponding fuel savings for transportation systems)

• Author : S Thompson
• Publisher : Elsevier
• Release Date : 1999-10-15
• ISBN : 9781855738324

This book covers an important and frequently overlooked area of welding - the repair of moulds, tools and dies. Because two rather different trades overlap in this process - welding and toolmaking, the materials and techniques involved have tended to be obscured. For many years, toolmakers and tool users have had to rely on the small number of specialist welders who do understand exactly what welding repair involves and have the skills to carry it out. Understanding the technical side

• Author : Philip Mitchell
• Publisher : Society of Manufacturing Engineers
• Release Date : 1996-12-09
• ISBN : 9780872634565

This volume focuses on the practical application of processes for manufacturing plastic products. It includes information on design for manufacturability (DFM), material selection, process selection, dies, molds, and tooling, extrusion, injection molding, blow molding, thermoforming, lamination, rotational molding, casting, foam processing, compression and transfer molding, fiber reinforced processing, assembly and fabrication, quality, plant engineering and maintenance, management.

• Author : M. Joseph Gordon, Jr.
• Publisher : John Wiley & Sons
• Release Date : 2010-03-25
• ISBN : 0470584483

The all-encompassing guide to total quality process control for injection molding In the same simple, easy-to-understand language that marked the first edition, Total Quality Process Control for Injection Molding, Second Edition lays out a successful plan for producing superior plastic parts using high-quality controls. This updated edition is the first of its kind to zero in on every phase of the injection molding process, the most commonly used plastics manufacturing method, with an all-inclusive strategy for excellence. Beginning with sales